... and to that end \|/ I'll endorse the capillary action of `PB Blaster'(R). however. if you have the time to pull the lever housing and get it to where oil will work down into the sleeve as you work the cable {LOL} Marvel Mystery Oil(R) smells kinda nice ... for a petrol product ... ________________________________ From: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM> To: vanagon@GERRY.VANAGON.COM Sent: Monday, November 19, 2012 2:44 PM Subject: Re: Lube for heater control cable? Hi Jack, mainly as long as one uses something half decent or better ..it will be fine. I would not use engine oil on a cable .. but just about any good spray lube will work. Scott http://www.turbovans.com/ On 11/19/2012 8:21 AM, Rocket J Squirrel wrote: > I griped a couple weeks ago ... > > Learning from my mistakes. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.