Yes, automotive seam sealer sticks better and flexes more so it doesn't detach or crack. Those panels do flex, and the seam opens and closes slightly. And, it's sandable and paintable. Stuart -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Mike S Sent: Wednesday, November 21, 2012 8:36 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: seam sealer On 11/21/2012 10:34 AM, ed donnen wrote: > With all this seam rust conversation, what exactly is seam sealer? > Exactly?? Why can't I use a marine grade silicone sealer, or any kind of > non-water based sealant from a tube and have the same effect? > ed- 91 DoKa- with seam rust, or so it seems Silicone RTV normally doesn't accept paint well. You can get a cartridge of seam sealer specifically made for autobody use for <$20 (3M Ultrapro 8300 urethane or All-Around 8300), so why are you thinking about fooling around with something meant for another purpose? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.