Date:         Wed, 28 Nov 2012 16:49:44 -0600
Reply-To:     nirav patel <agencia72@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         nirav patel <agencia72@GMAIL.COM>
Subject:      1.5'' diameter steel coolant lines from Van Cafe
Content-Type: text/plain; charset=ISO-8859-1

I'm upgrading my steel coolant lines on an 1984 westy with the 1.5''
diameter steel coolant line kit from Van Cafe. Was wondering if there was
anyone on this list that has done this job.  It seems I will have to open
up the hole on the cross member which did hold the 2 factory 1.25'' steel
lines and the 2 heater hoses.  Before I start cutting away, I thought it
would be wise to chat with someone that has done it.  I would appreciate
any tips or learnings.

+nirav

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.