Date:         Thu, 13 Dec 2012 13:56:09 -0800
Reply-To:     mark drillock <mdrillock@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mark drillock <mdrillock@COX.NET>
Subject:      Re: Upper steering column grease recommendation and what else to
              do while replacing ignition switch
Comments: To: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
In-Reply-To:  <50CA4CD1.7040604@turbovans.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

No way, that stuff is easy compared to removing and replacing a Syncro
fuel tank.

Mark

Scott Daniel - Turbovans wrote:
> It is about 'the' most difficult job o a vanagon. - taking pedal
> assembly outwith dash still in.
>
> The only worse job  I can think of is adjusting the length of the clutch
> master cylinder push rod.
>

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.