Date:         Mon, 10 Dec 2012 10:23:20 -0700
Reply-To:     OlRivrRat <olrivrrat@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         OlRivrRat <olrivrrat@COMCAST.NET>
Subject:      Re: Power steering U-joint
Comments: To: Robert Stevens <mtbiker62@gmail.com>
In-Reply-To:  <F00E0DB7-2880-4934-BF15-40C8A33B51D9@GMAIL.COM>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

        I have not looked @ one so I don't know if this would be possible or
practical but instead of the

Baggie could you use a large enough piece of HeatShrinkTubing & just
shrink the ends after install?

                                                        ORR~DeanB

On 10 Dec , 2012, at 9:59 AM, Robert Stevens wrote:

>
> On Dec 10, 2012, at 9:48 AM, OlRivrRat <olrivrrat@comcast.net> wrote:
>
> I suppose that might depend a lot on its current condition & what,
> if any, issues or symptoms it has
>
> been displaying recently that made you feel the need to clean it up.
>
>       & how does a cannibalized plastic baggie differ from a plain old
> ordinary plastic baggie?
>
> Mine "appears" to be in good condition, considering it's been
> working there for 26 years.
> I would use a large freezer back, cut it into a strip about 7" high,
> 12"-14" long, wrap it around
> the joint and zip tie it in place, leaving a little bulge breathing/
> movement space inside.
>
> bob