Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2012, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 10 Dec 2012 16:22:31 -0800
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: More On Difference Between the 1.9 and 2.1
Comments: To: Jeff Stewart <fonman4277@comcast.net>
In-Reply-To:  <gh3fj2hc80qr8wdlp66f1bka.1355179489369@email.android.com>
Content-Type: text/plain; charset=UTF-8; format=flowed

Hi Jeff, ok ..so you have a syncro 2.1 engine then ? yes, I do have one cast iron, 3 grove syncro 2.1 crankshaft pulley.

I'd feel better sending you a picture of the engine side of my pulley .. and we'll compare it to the engine side of your current doka pulley.

pmail me . thanks, Scott www.turbovans.com

On 12/10/2012 2:44 PM, Jeff Stewart wrote: > Really? On the crank pulley, this 2.1 did come out of a Syncro! See, it's the little stuff like that I was afraid would bite me in the a**! Do you have a 3 grove pulley off a Syncro? Thanks, Jeff > > Sent from where ever I happen to be right now. > > Scott Daniel - Turbovans <scottdaniel@turbovans.com> wrote: > >> thecrank pulley will fit, but the timing mark on it is slightly different. >> If you want it right .. >> you want a real 2.1 crankshaft pulley, 2WD drive version. ( syncro >> slightly different in the seal area I believe ). >> >> I have these parts by the box-full. >> 2.1 2WD crank pulley, AC brackets and PS bracket .. >> and the various minor parts that go with them. >> >> your AC and PS brackets will be fine. >> >> It depends on whether one collects and holds on to manuals , tools, and >> parts ... >> if one is planning to do this 'vanagon play' long term ..then naturally >> all the stuff to support that habit starts to accumulate. >> >> and it's SO handy when you need something .....you dig in your stash >> ..the there's just what you need ! >> >> scott >> >> On 12/9/2012 4:55 PM, J Stewart wrote: >>> Ok, so I know have in my possession a used 2.1 engine for my '89. When buying a used engine, just like a used car, you aren't going to (usually) get everything you want. This 2.1 came out of a Doka, and it didn't have a/c or power steering-my '89 has both. So, I need a 3 groove crank pulley, a/c bracket, and ps pump bracket. I have a 1.9 already with all three-will they just swap right over to the 2.1? My guess is yes. I have also ordered ANOTHER Bentley manual. Every time I sell a Vanagon I sell my Bentley, then I buy another Vanagon and another Bentley-usually for more than I sold mine for-still trying to figure out how it always works that way. Thanks, Jeff >>> >>> >>> >>> >>> >>> >>> >>> Jeff Stewart >>>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.