Or drill each tab and use tek screws to put it back together, saving yourself $32 on those clips. Mike B. On 12/18/2012 6:41 PM, David Beierl wrote: > At 03:04 PM 12/18/2012, HotelWestfalia wrote: >> is; how easy or difficult it is to get to it. > > It's extremely easy to get to, it's just sitting there right next to > the blower motor. Oh yes, you do have to take the dash off and open > the heater box. That part's not quite so easy. > > Bentley tells you to split the welded tabs on the heater box with a > knife; but it's much more practical to simply saw them off using a > jeweler's saw, coping saw or similar. They're of no further use as > you have to reassemble the box with a set of metal spring clips. > > Yours, > David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.