Hi all. Did VW mount the diesel exhaust to the engine *mainly* to reduce transmitting engine noise to the vehicle body? i.e. why didn't they use a flex joint and hang the exhaust from the body with rubber isolators? (this Foreign Auto Supply kit should show what I mean): Or was this done mainly to prevent the exhaust from cracking? Comparing a gas to diesel is "apples to oranges" but understanding why VW designed the diesel exhaust the way they did, will help me decide which approach use for the new exhaust on my I4 swap. I'm sorry if this ends up being a cross post but felt it ok to ask the DV list. Thanks Neil.
-- Neil n 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp '88 Slate Blue Westy to be named. '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ Vanagon VAG Gas I4/VR Swap Google Group: http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.