Donna: Real Vanagon syndrome, which surfaced a while after the 2.1 was introduced, is cutting out after long sustained highway driving at a steady speed. The cutting out can also be bucking. A restart cures it, until it comes again. It is a problem with the signal coming from the AFM when the vane stays in a fixed position for a long period of time. The VW pigtail or home-made fixes with a capacitor cure it. The restart cures it because of the power off/on to the ECU. I think real Vanagon syndrome is much less common than applying the name to another problem. From your description, you MIGHT have Vanagon syndrome. If so, a pigtail will solve it. If not, checking wiring is the right thing to do. If the tach drops to zero when the cutout occurs, suspect the Hall sender in the distributor. The sender plastic can crack where the wiring exits and there can be a break in the wire that comes and goes. Your description matches what I remember when my Hall sender went bad. The tach is driven off this wire, so that is why it drops to zero when the sender cuts out. Good luck, Richard |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.