Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2012, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 21 Dec 2012 00:07:52 -0800
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: [Diesel-Vanagon] Re: Diesel Vanagon Exhaust Design
Comments: To: Scott Daniel - Turbovans <scottdaniel@turbovans.com>
Comments: cc: Diesel-Vanagon@yahoogroups.com
In-Reply-To:  <50D40061.2050609@turbovans.com>
Content-Type: text/plain; charset=ISO-8859-1

Thanks for your thoughts and comments Scott.

Yah I know; don't reinvent the wheel. < grin >

I just don't want to have to do this exhaust "design" and build job a 3rd time.

My engine is mounted at 15º, and I'm running a cat so the space between the driver and passenger side "DV" brackets isn't as wide as a 50º diesel Vanagon engine. The arm I built off of the driver side bracket, Image: http://tinyurl.com/9ythuq5 (uses a 5" muffler clamp) was an add on redesign done shortly before the down pipes finally cracked. I might keep this cat support design but don't really like the idea of running one the driver side exhaust support to the cat.

Neil.

On Thu, Dec 20, 2012 at 10:23 PM, Scott Daniel - Turbovans <scottdaniel@turbovans.com> wrote: > > hi .. > as I said, stock DV exhaust systems don't have a problem with cracking. > > on the two DV systems I have laying around that have a flex junction in them.. > the muffler is still mounted to the engine with rubber mounts. > > the stock system is So Good that I have reproduction left and right muffler brackets that I had made. > Nice 'n heavy duty too. > Have a few sets left. > > > I get them cut out by a computer controlled machine .. > very simple to order say 5 more , at any time. - as they aleady exisit in a computer program at my fabricator's.

-- Neil n

65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.