Date:         Sat, 29 Dec 2012 14:52:23 -0800
Reply-To:     marc rose <mrose1028@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         marc rose <mrose1028@GMAIL.COM>
Subject:      drips of antifreeze off head
Content-Type: text/plain; charset=ISO-8859-1

90 carat 2.1 aka "ROSIE".  I have just finished installing some new bumpers
I fabricated, changed the oil and changed the gasket on the oil cooler
aswell as the hoses that go to it.  I was looking under her three days ago
and saw a drip of anti freeze hanging of the front side of the left head
where the sheild bolts on and figured it was some left over from doing the
hoses.  I wiped it off and drove her around some and she ran as normal.  I
looked again today and there was that drip again.....nothing puddled on the
shop floor though.  The tanks look to have the correct level I was just
looking for advice as far as how much should I drive it if it is a head
gasket?  I do plan on doing some sort of ugrade on her motor in the future
just don't want to do it right now...

thanks