Date:         Sun, 6 Jan 2013 15:54:39 -0500
Reply-To:     JordanVw@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JordanVw@AOL.COM
Subject:      Re: What lugs do Carat Alloys need?
Comments: To: teer.vanagon@GMAIL.COM
Content-Type: text/plain; charset="US-ASCII"

if you want to get some cheap ones... just use some from an junkyard  audi.
   they bolts are the same, but longer and have a cone  seat.. they have
the same thread pitch etc.   its just that instead of  using a 19mm socket to
remove them you will have to use a 17mm  socket.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.