Thanks Neil. I was hoping to avoid a used part and think that Bus Boys may have these connectors. What threw me was that they were referring to it as the "thermotime" switch connector. Here's the link: http://www.bus-boys.com/bb13386.htm#2pin As often as the temp 2 sensor seems to fail it's probably wise to replace these connectors for the temp 2 and temp gauge senders. You really don't want to be without either operating exactly right! Thanks for your input. David Clarkson -----Original Message----- From: neil n <musomuso@gmail.com> To: David Clarkson <dvdclarksn@aol.com> Cc: vanagon <vanagon@gerry.vanagon.com> Sent: Sat, Jan 12, 2013 3:02 pm Subject: Re: looking for a source for temp 2/temperature gauge sending unit connectors For certain connectors, a VW specific shop might have replacement leads with the metal terminal already crimped on. This is what i found for a (Mylex?) connector to the hall sender on my ABA. My guess is that the terminals used on your plugs are removable. Those senders are used on other VW's. Bone yard? Older Mk1-Mk3? Neil. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.