Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2013, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Mon, 21 Jan 2013 22:57:54 -0500
Reply-To:   Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:   Re: radius arm hole looks awefully wonky.
Comments:   To: Larry Alofs <lalofs@gmail.com>
In-Reply-To:   <CA+r=Jhoc9PTEt5uRAYweDRXk2Cao09xFVEELMFbXcMw_nswVSw@mail.gmail.com>
Content-Type:   text/plain; charset="us-ascii"

The link includes the actual part number.

93162A380

Dennis

From: Larry Alofs [mailto:lalofs@gmail.com] Sent: Monday, January 21, 2013 10:26 PM To: Dennis Haynes Cc: vanagon@gerry.vanagon.com Subject: Re: radius arm hole looks awefully wonky.

The link seems to yield a page with washers of many different sizes.

Larry A.

On Mon, Jan 21, 2013 at 8:47 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote:

That hole really needs a weld repair. Here is a link to the washer I weld in to repair this.

http://www.mcmaster.com/#93162A380

A 1-9/32" washer (1-1/8 bolt size) will also work.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of brett rueff Sent: Monday, January 21, 2013 7:23 PM To: vanagon@GERRY.VANAGON.COM Subject: radius arm hole looks awefully wonky.

Started installing the new GW standard height springs today. Also have fox shocks in the box ready to go as well. In removing the radius arm bushing it looks pretty ugly: https://skydrive.live.com/?sc=photos <https://skydrive.live.com/?sc=photos&cid=7bf533a9aab41079#cid=7BF533A9AAB41 079&id=7BF533A9AAB41079%211052> &cid=7bf533a9aab41079#cid=7BF533A9AAB410 79&id=7BF533A9AAB41079%211052 Also I noticed the GW springs are about 1/4" bigger inside diameter than the ones I am removing. I did a few dry fits and it doesn't seem to 'nest' on the lower control arm as well - there is a little slop between the spring and the moulded collar on the LCA so where the end of the spring is supposed to but up against it sits out a bit far and is not nicely snuggled in there. Work has stopped while I wait for new radius arm bushings to be shipped, so comments welcome! Otherwise the removal has gone well so far. Came apart pretty easy. Brett91 Vanagon


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.