Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2013, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 24 Jan 2013 12:59:43 -0600
Reply-To:     Jim Felder <jim.felder@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Felder <jim.felder@GMAIL.COM>
Subject:      Re: Here's a new one...
Comments: To: Stephen Grisanti <bike2vcu@yahoo.com>
In-Reply-To:  <1359052794.97899.YahooMailClassic@web164505.mail.gq1.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1

"Will a magnet that jammed a seat belt latch on a 91 Wolfsburg automatic with a stock 2.1 also jam a seat belt latch on an 84 gl manual/zetec with 15 inch steels?"

Jim

On Thu, Jan 24, 2013 at 12:39 PM, Stephen Grisanti <bike2vcu@yahoo.com>wrote:

> I can see it now for future posts: > "My wipers stopped working.""Check for magnets." > "What tires should I buy?""Depends on your magnets." > "Oil!""Magnets!" > Etc., etc.... > Stephen > > --- On Thu, 1/24/13, dhanson928@gmail.com <dhanson928@GMAIL.COM> wrote: > > From: dhanson928@gmail.com <dhanson928@GMAIL.COM> > Subject: Here's a new one... > To: vanagon@GERRY.VANAGON.COM > Date: Thursday, January 24, 2013, 12:35 PM > > Passengers seat belt stopped working. You could not insert the belt into > the latching mechanism. I thought, "After 28 yrs, something broke or got > stuck somehow" and began with a thorough douche with wd 40. I began poking > around and I could see what I assumed was a "latch" in the slot thats meant > to accept the belt slider. Tried prying that back "into place" but it just > moved around....So, removed the arm and pried apart the cover. Lots of > small parts, springs, levers, etc. Began pushing things around, curious as > to exactly which piece might have broken..."Huh? What's THIS piece do?" I > think... Well, that piece turned out to be a small magnet, having gotten > off my dash somehow, and made it's way into the little slot, looking all > innocent, like it belonged there....especially when trying to troubleshoot > without removal and disassembly. Removed the obstructing "stealthy" magnet > and all is good again >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.