Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2013, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 22 Jan 2013 10:35:03 -0500
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: radius arm hole looks awefully wonky.
Comments: To: OlRivrRat <OlRivrRat@COMCAST.NET>
Content-Type: text/plain; charset="utf-8"

This both a corrosion and wear issue. Once the mount fails metal to metal wear occurs. I have the rods worn more than half through.

Dennis, And I still can't type on this Windows 8 Phone! ________________________________ From: OlRivrRat<mailto:OlRivrRat@COMCAST.NET> Sent: ‎1/‎22/‎2013 12:57 AM To: vanagon@GERRY.VANAGON.COM<mailto:vanagon@GERRY.VANAGON.COM> Subject: Re: radius arm hole looks awefully wonky.

Brett & Neil

What is the age of these 2 Vans & what sort of environment do they live in?

ORR ~ DeanB

On 21 Jan , 2013, at 8:20 PM, neil n wrote:

> I like that repair idea better than what I did: > > https://sites.google.com/site/tubaneil2/radiusarmholerepair > > Cutting the hole in the patch wasn't rocket surgery but starting with > a nice round hole makes more sense. > > If Bretts radius arm is damaged like mine was: > > https://sites.google.com/site/tubaneil2/radiusarm > > if a weldor made a pass then shaped, would that be structurally > sufficient? Or even required? > > Neil. > > On Mon, Jan 21, 2013 at 6:47 PM, Dennis Haynes <d23haynes57@hotmail.com > > wrote: >> >> That hole really needs a weld repair. Here is a link to the washer >> I weld in >> to repair this. >> >> http://www.mcmaster.com/#93162A380 >> >> A 1-9/32" washer (1-1/8 bolt size) will also work. >> >> Dennis >> > > > > -- > Neil n > > 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp > > '88 Slate Blue Westy to be named. > > '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ > > Vanagon VAG Gas I4/VR Swap Google Group: > > http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.