Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2013, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 31 Jan 2013 20:08:49 -0800
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Steering. Re: P 48.14 Measurement "a"
Comments: To: Rocket J Squirrel <camping.elliott@gmail.com>
In-Reply-To:  <510B28F4.5040706@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Well lets be honest. Nothings going to help me. Me with this crazy nutty Vanagon Addiction and all. ;^)

Scott: What bugs me is that the locking collar (don't know correct term) appears to be close to the end of the shaft. But I see your point; if that part were really cockeyed, the steering would be stiffer.

A better picture of what I mean. Blue arrow points to end of the "locking collar":

https://lh5.googleusercontent.com/-gVkK8CVJ9xk/UQro3rJcwwI/AAAAAAAAGuc/efvSeyJiwV4/s720/Upper%253Alower%2520Steering%2520column%2520adjust.jpg

Maybe that's the normal position of that collar?

It steers ok, but every little bit helps.

One thought. Maybe the alignment guy used that locking collar to adjust the steering wheel to centre after doing the toe adjustment? Highly UNLIKELY and AFAIK that method would be incorrect, but IF he did, maybe he allowed the upper column to slip out a bit thus allowing for a larger "a" gap?

Like I said though. Highly unlikely.

Neil.

On Thu, Jan 31, 2013 at 6:31 PM, Rocket J Squirrel <camping.elliott@gmail.com> wrote:

> Can no one help this man? I recall staring at that picture in the manual, trying to understand that measurement. > > -- > Jack "Rocket j Squirrel" Elliott > 1984 Westfalia, auto trans, > Bend, Ore. > > > On 01/30/2013 06:40 PM, neil n wrote: >> >> >> P 48.14 in Bentley specifies a measurement for gap "a". >> >> By "a", do they mean the gap between the upper and lower parts of the >> steering column at the rubber bushings? >>

-- Neil n

65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.