Whoa Ben, not going hi-press. on the wiper washer pump yet... just musing about a relay for the stock one. But I do admit to envy every time I see a modern car washer spurt so vigorously :) R&D dept of Bell Industries has reported back to me, they have the titanium sheet stock, they are just discussing amongst themselves whether to shamelessly copy the "camp-a- toaster" (http://www.dyersonline.com/world-famous-stovetop-camp-a-toaster.html), or make one with stainless mesh support grid. The R&D guys dither around so much it infuriates me. :) alistair
On 2013-02-10, at 12:29 PM, Ben T wrote: > Anything is possible but the pump in question is a higher pressure type which is not as common as those found in your FLAPS. I did find the P/N search yielded several alternatives which can actually pop into the cavity on the side of the large capacity washer tank. The only difference being the word of the day - connections. > > The connector on the T3 are side-by-side connectors. The ones on the Audi version of the pump is in a 'T' or 'L' configuration. No big deal if you are making your own harness for it. > > Alistair is looking at the hi-press pump to solve his lack of flow issue. It might be overkill in that application IMHO, but we are talking Alistair here, afterall. Can't wait to see the upcoming titanium Excelsior toaster.:-) > > > BenT > > sent from my electronic leash > > On Feb 10, 2013, at 12:18 PM, neil n <musomuso@GMAIL.COM> wrote: > >> Would an aftermarket "universal" type pump be suitable for this application? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.