Date:         Sun, 10 Feb 2013 13:47:19 -0500
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: Wiring headlight washer pumps
Comments: To: Alistair Bell <albell@SHAW.CA>
In-Reply-To:  <33D42919-FE87-4B5B-9484-1320654E682E@shaw.ca>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 01:42 AM 2/10/2013, Alistair Bell wrote:
>Funny thing, that pump relay also gets a lead from G9 connector,
>which is hot when parking lights on. The pump relay looks a little
>different in the wiring diagram than a plain old relay.

I'd be interested in seeing the diagrams, but I imagine that
connection enables the relay when the lights are on, so you don't
waste fluid when you're not using the headlights.

Yours,
David

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.