Date:         Mon, 11 Feb 2013 19:03:21 -0600
Reply-To:     James Felder <jim.felder@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         James Felder <jim.felder@GMAIL.COM>
Subject:      Re: Powder coating question--westy stuff
Comments: To: Courtney Hook <courtneyhook@shaw.ca>
In-Reply-To:  <3445ACD432B74328A7578BA2728365D5@MainComputer>
Content-Type: text/plain; charset=us-ascii

Thanks, I will check it out with the paint shop. I just don't want to have to take the springs out. 

Jim

On Feb 11, 2013, at 5:40 PM, "Courtney Hook" <courtneyhook@shaw.ca> wrote:

> In order to powdercoat, you need to have the parts removed in order to apply the plastic powdercoat with an electrical charge. Then you need to bake the parts anywhere from 400-450 degrees in a powdercoat oven in order to melt the powdercoat material. I do this at home with a dedicated powdercoating oven and powdercoating gun kit.
> HTH,
> Courtney
> 
> 
> ========I'm thankful to all those who said "no". Because of them I did it myself.========
> -----Original Message----- From: Jim Felder
> Sent: Monday, February 11, 2013 3:29 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Powder coating question--westy stuff
> 
> I was thinking about having my table legs powder coated in silver because
> of the bits of corrosion and nicks that have accumulated on them over the
> years. While I'm at it, I would like to powder coat the spring-loaded top
> raising mechanism. Will this be possible without taking the thing apart?
> From my dealings with these things loose out of the car, dealing with them
> is like trying to fight an ostritch. I would not want to take one apart.
> 
> Jim