Might be a ground problem (given that it's direction specific) or the relay. For me, both turn signals (and emergency flashers) would go solid after flashing for about half a minute. Replaced the relay and solved that particular problem. In your case I'd start by checking the grounds on your left hand signals. -Jarrett On Feb 15, 2013, at 9:43 AM, Craig Cowan wrote: > So i've got an odd intermittent issue that i've never dealt with before. > My blinker ALWAYS works right when blinking to indicate a "right" turn. > About 60% of the time Left blinker works properly as well. > But, sometimes i'll indicate a left and the green LED will just go solid, > and the blinkers don't blink. > Shutting it off and turning it back on a few times can make it blink > normally though. > > I thought they blinked fast when the bulb was out, so what's this? > It's a '90 GL auto with cruise. > > -Craig |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.