Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2013, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 25 Feb 2013 14:30:19 -0600
Reply-To:     nirav patel <agencia72@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         nirav patel <agencia72@GMAIL.COM>
Subject:      Re: steel coolant lines on a '84 westy
In-Reply-To:  <512BC1D8.1030507@turbovans.com>
Content-Type: text/plain; charset=ISO-8859-1

My bad. It's a '84 westy, formerly powered with the 1.9L engine.

Thanks for the kick in the pants, Jarrett.

+n

On Mon, Feb 25, 2013 at 1:56 PM, Scott Daniel - Turbovans < scottdaniel@turbovans.com> wrote:

> Just make sure the coolant is going through the radiator in the correct > direction. > I.e. one pipe is 'feed to the radiator' the other is 'return to the > engine' .. > Bentley shows you which is which. > 'the rule' at the radiator about which is which 'down and out' ... > the bottom connection sends coolant back to the engine. > > It always helps if people say what year and version of vanagon they are > asking questions about. > Looks like it was an 83 waterboxer to me. > > I thought this type engine conversion was a no-brainer and eeverythingjust bolts right up from the kit. > > > On 2/25/2013 9:55 AM, nirav patel wrote: > > Hey all, > > Was wondering if anyone on this list has replaced the original steel > coolant lines with the 1.5'' four part system? I finally got mine in place > in addition to a new radiator and had a few questions in terms of the > install. The pipes are strong and sturdy under the van, but I plan to use > some worm drive clamps to get a tighter fit. > > The question I have is with the pipe entry points into the engine bay. They > are not exact. It seems like I will make it work in terms of attaching to > the coolant hoses, but just wanted to know if anyone else had the same > placement of pipes. Essentially I want to make sure I did not do anything > glaringly wrong. > > video of underside of van:http://www.youtube.com/watch?v=mXfMl5ZzNZA > > video of engine bay (100Mb file):http://dl.dropbox.com/u/867582/steel-lines.MOV > > images:http://dl.dropbox.com/u/867582/steel-lines1.JPGhttp://dl.dropbox.com/u/867582/steel-lines2.JPGhttp://dl.dropbox.com/u/867582/steel-lines3.JPG > > I think I might be firing up this van soon. Wish me luck. I'll be the last > in the group-18 bostig. Quite an achievement. > > +n > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.