I used a foam roller, worked on small sections (1-2 sq ft) at a time and "tipped" off the rolled areas with 2" natural hair brush. Tipping off to break any bubbles. I did not work the rolled areas much at all with brush, the paint levelled off by itself after a few minutes. alistair
On 2013-03-04, at 9:00 AM, neil n wrote: > Thanks! > > Rolled. > > "Tip" means? > > Used a small brush for some bits of luggage cleats. > > Admittedly had a few runs as I loaded roller too much when painting > the repaired section. This paint may not sand as well as others. > > Neil. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.