Date: Tue, 5 Mar 2013 22:41:58 -0800
Reply-To: Alistair Bell <albell@SHAW.CA>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Alistair Bell <albell@SHAW.CA>
Subject: Re: Canvas Replacement: Remove Upper Bed Help?
In-Reply-To: <CAB2RwfgezTOXYwb-SDTy6ai8EqRKrX0qvVdXBBW0ncdjLmjVTw@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii
Neil,
if you can, pick up a roll of "dum-dum" sealing mastic (rv store). The stock stuff under the aluminum extrusions is very good, might still be soft, but best to have a back up.
alistair
On 2013-03-05, at 5:18 PM, neil n wrote:
> And on the topic of tips for staple type canvas replacement, there's
> some great looking ideas here:
>
> http://www.thesamba.com/vw/forum/viewtopic.php?t=536086&postdays=0&postorder=asc&highlight=sir+sam+upholstery&start=0
>
> The entire thread is on poptop rehab, but around about page 5, there's
> some staple canvas specific tips.
>
> And this tool happens to be on sale locally
>
> http://www.canadiantire.ca/AST/browse/6/Tools/HandTools/MultiTipScrewdrivers/PRD~0588626P/Mastercraft+29-pc+Screwdriver+Set.jsp?locale=en
>
> Not sure if it will be of any use, but will give it a look.
>
> Neil.
>
> On Mon, Mar 4, 2013 at 8:37 PM, neil n <musomuso@gmail.com> wrote:
>
>
>> Will removing the upper bed make canvas replacement, top still
>> installed, any easier?
>>
>> My canvas has the staples.
>
>
> --
> Neil n
>
> 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp
>
> '88 Slate Blue Westy to be named.
>
> '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/
>
> Vanagon VAG Gas I4/VR Swap Google Group:
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
|