Wait until you try and get them back on. I usually don't insert the cover plate back on fully until I have all 4 knobs on halfway or so. Dom 85 Westy -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Rocket J Squirrel Sent: Monday, March 04, 2013 3:09 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Air and heat knobs on levers Bill, you certainly can. However, it takes a strong pull and I have yet to get a knob off without damaging the panel and/or banging my hand into something when it releases. -- Jack "Rocket j Squirrel" Elliott 1984 Westfalia, auto trans, Bend, Ore. On 03/04/2013 11:57 AM, WILLIAM WITZ wrote: > Hi all I have an 84 westy. I was wondering if you can pull the plastic > knobs on the air/ heat levers in order to remove the plate. I have > some new leds for my burnt out lights. Thanks in advance. > Bill 84 westy -Tiico > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.