And you likely won't. I'm sure that was only for manufacturing convenience and is not necessary. Stuart -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Zoran Mladen Sent: Tuesday, March 12, 2013 3:38 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Gas leaking after filling to the top...84 2wd.. I have seen it on the majority of vanagons. I have yet to see anyone re-install it on replacement of the cross over pipe. Sent from my iPad On Mar 12, 2013, at 16:57, mark drillock <mdrillock@COX.NET> wrote: > The screw and hook was likely there when the van was new AFAIK. I have > seen many vans with it, all years. > > Mark |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.