Date:         Tue, 12 Mar 2013 23:56:13 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Gas leaking after filling to the top...84 2wd..
Comments: To: zmaninco@YAHOO.COM
In-Reply-To:  <99BDB1AC-CDDE-4A4B-B64A-D95B2BE0124D@yahoo.com>
Content-Type: text/plain; charset="US-ASCII"

I do! I'll even replace it if its missing.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Zoran Mladen
Sent: Tuesday, March 12, 2013 6:38 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Gas leaking after filling to the top...84 2wd..

I have seen it on the majority of vanagons.  I have yet to see anyone
re-install it on replacement of the cross over pipe.

Sent from my iPad

On Mar 12, 2013, at 16:57, mark drillock <mdrillock@COX.NET> wrote:

> The screw and hook was likely there when the van was new AFAIK. I have
> seen many vans with it, all years.
>
> Mark
>
>
> John Meeks wrote:
>> On Tue, Mar 12, 2013 at 2:51 PM, neil n <musomuso@gmail.com> wrote:
>>
>>> Hi Stuart.
>>>
>>> Thanks. Yes I'm familiar with the cross over tube. I didn't see a
>>> fastener holding cross over to van on the tank I R&R'd on my '81 and
>>> tank I pulled from an '85.  I was asking and attempting to clarify.
>>>
>>> On Mon, Mar 11, 2013 at 11:49 AM, Zoran Mladen <zmaninco@yahoo.com>
wrote:
>>>> ....  Keep in mind that the crossover pipe is secured to the body
>>>> in the
>>> middle with a single screw and hook.
>> Yeah I thought that screw and hook reference was a bit odd. Nothing
>> like that on the '84 OR '91 I've replaced tanks on.
>>
>>