Date:         Tue, 12 Mar 2013 09:57:45 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Gas leaking after filling to the top...84 2wd..
Comments: To: zmaninco@yahoo.com
In-Reply-To:  <0FB4A20D-B0EC-41D3-B2AD-1CA6F07A6B5D@yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1

The crossover pipe is secured to the body?

I didn't see that on my '81 but then maybe someone removed it? Is this
screw & hook something specific to certain models or model years?

Don: if you have the larger OD fill pipe, make and alignment marks if
possible, of how it all goes together. The hole in frame is not much
bigger than the pipe. If misaligned, the big seal between fill pipe
and tank can fail. BTDT:

https://picasaweb.google.com/musomuso/GasTank


Neil.


On Mon, Mar 11, 2013 at 11:49 AM, Zoran Mladen <zmaninco@yahoo.com> wrote:


> Now you have sufficient room to reach in and replace all parts.  Keep in mind that the crossover pipe is secured to the body in the middle with a single screw and hook.  I bend that hook out of the way before lowering.



--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines