My head lights - which were working fine - are still out - and every time I go to work on them I get interrupted for extended periods - lose my place - forget where I was, and have to start over. Need help! To repeat the story - made a stop at night - lights and ignition off - when I started it up - no lights. Did the ignition switch X circuit check - and the lights flashed. Replaced the switch with a new one - checked again - no lights at all. I have been unable to fix that. I NEED to get those lights on, but this is turning into a real challenge. Question: is there a way to temporarily install a bypass circuit to power the lights - at least on the low beams so I can drive it at night, until such times as I can find and fix the real problem? Any help at all on this is appreciated. Thanks. John in Alabama |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.