Neil, about those triangular bits, I may have been conflating the Reimo bed with the westy bed see here http://www.t3-infos.de/images/Reimo-Klappsitzbank.jpg alistair
On 2013-03-17, at 10:44 AM, neil n wrote: > Hi all. > > Finally got my rear bed re-foamed and recovered. Pics and notes here. > I may add more. > https://picasaweb.google.com/musomuso/RearSeatBedReFoamEtc# > > Anyhow..... > > When folded out, the rear bed has always had a 3/4" - 1" gap on the > driver side between bed bottom and storage frame. A few years ago, I > tightened a bolt or other on this side so maybe I put it out of > alignment. > > Is there a typical part or parts that wears, or, is there an > adjustment, loosen a part or two, reposition, that might address this? > It's a narrow spot to work in so direction toward the likely offender > would be appreciated! > > Thanks > > Neil. > > > -- > Neil n > > 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp > > '88 Slate Blue Westy to be named. > > '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ > > Vanagon VAG Gas I4/VR Swap Google Group: > > http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.