A plastic welder would plug that very easily. I cut the entire top off my grey water tank (Bus Depot), inverted the cut off section and plastic-welded it back on. They work well. Bob Sent from DAS4X4 > Subject: What is this hole....? > > I have the water tank out and I’m sure my water leak is from this hole: http://www.feddishbasses.com/vw/fringe.html > > Sorry for the grainy shot. Anyway, what was here originally and what should I do with it? > > Thanks, > Bryan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.