Date:         Sun, 17 Mar 2013 10:44:54 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Adjust Rear Bed? (and rear seat re-foam pics)
Comments: To: all listees <wetwesties@yahoogroups.com>
Content-Type: text/plain; charset=ISO-8859-1

Hi all.

Finally got my rear bed re-foamed and recovered. Pics and notes here.
I may add more.
https://picasaweb.google.com/musomuso/RearSeatBedReFoamEtc#

Anyhow.....

When folded out, the rear bed has always had a 3/4" - 1"  gap on the
driver side between bed bottom and storage frame. A few years ago, I
tightened a bolt or other on this side so maybe I put it out of
alignment.

Is there a typical part or parts that wears, or, is there an
adjustment, loosen a part or two, reposition, that might address this?
It's a narrow spot to work in so direction toward the likely offender
would be appreciated!

Thanks

Neil.


--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines