the tap I use is a M12 X 1.75 Just *don't* drop anything into the clutch area ! Stuff a rag in theretemporarily. also ...super important to use a drift or punch with a shoulder on it to install the new one. A bolt with a nut on it works nicely. On 3/22/2013 9:22 AM, miguel pacheco wrote: > I've always used a tap that just catches the inside walls of the bushing (I > forget the size.) I gently drive it in and, once the tap bottoms out, I > continue turning clockwise and it pulls the bushing out. Easy as pie..... > Miguel > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.