Nice work Jarrett. Have you tackled the inside curve trim? I have some shrinking away from entrance to cubbies. I've done the outside edges, but not the inside ones yet... alistair
On 2013-03-25, at 3:59 PM, Jarrett Kupcinski wrote: > This past weekend I was cleaning up the garage, and with the tables removed from the last trip I decided to fix the shrunken trim. The method of using a heat gun and glue was mentioned a few months ago here on the list, and it works well. Write-up and pics here: http://www.kpcnsk.com/?p=501 Very easy, very satisfying repair. You could probably do it with a good hairdryer set on high. > > -Jarrett Kupcinski > 89 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.