Thanks Stuart, I'll give your technique a try. cheers alistair On 2013-03-26, at 8:45 AM, Stuart MacMillan wrote: > I have. All of them! I started the whole trim stretching project with the > ones on the back closet door because they were so far out of the corners > they had been bent back and deformed by the door (eastern Oregon sun through > the back window). Same procedure works well. Soften and pull out a bit > more past the corner, add glue, and then I used a round 2" diameter railing > scrap to roll the corners back in and kept rolling until they cooled. Still > fine after a year. Be sure to pull out 3 or 4 inches beyond the corner to > stretch. > > Stuart > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Alistair Bell > Sent: Monday, March 25, 2013 10:40 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Fixing the trim > > Nice work Jarrett. > > Have you tackled the inside curve trim? I have some shrinking away from > entrance to cubbies. I've done the outside edges, but not the inside ones > yet... > > alistair |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.