Date: Fri, 22 Mar 2013 14:34:49 -0400
Reply-To: "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject: Re: Cv boots cracking
In-Reply-To: <018701ce271e$2f39c3a0$8dad4ae0$@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
We used to be able to get the GKN/Lobro aftermarket boots for the rears and
when we did, you could look around the edge and see the VW/Audi logo that
was just under the edge of the metal base of the boot. When I did this
occasionally I would get someone who had a similar problem as Craig. They
would tell me that they installed the boots and they only lasted a couple
of years. Then other folks would never really have an issue with them. I
am not sure if there is an installation issue that could cause the boots to
prematurely fail? I wouldn't think they would dry rot and crack unless the
rubber itself had just failed because of the quality of it, but I am not a
rubber expert. Any one have an idea of why this would happen to some and
not happen to others? Right now we have either Rein (which I haven't been
getting any complaint on) or Meyle. Of the two I would rather use the Rein
brand as they seem to be a higher quality brand and are made in Italy. The
Meyle brand is usually made in China or India.
Ken Wilford
John 3:16
www.vanagain.com
On Fri, Mar 22, 2013 at 12:56 PM, Stuart MacMillan <stuartmacm@gmail.com>wrote:
> The OEM dealer boots are EDPM rubber (at least they used to be) and worth
> the money. My '84's boots were still good when I sold it in 2006 after
> 200k
> miles, and I replace the joints once (not the boots). Lucky for me, my
> "new"
> '85 still has the original boots and they are fine after 145K.
>
> I don't know what some of the aftermarket boots are made of, and there is
> probably no way to tell for sure.
>
> It's too bad no one sells a split boot anymore, at least with those you can
> replace them easily. You might call these guys to see if they have
> anything
> though:
>
> http://www.dormanproducts.com/c-255-cv-joint-boot-kits-solvent-welded-split-
> boot.aspx
>
> Or look for used OEM boots!
>
> Stuart
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Craig Cowan
> Sent: Friday, March 22, 2013 8:30 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Cv boots cracking
>
> Because it doesn't need to be serviced at this interval! I just rebuilt
> some
> with a friend that were original to the bus and have never been serviced (
> he's the original owner). 140,000 miles and 26 years of use, and the boots
> we took off were fine!
> So why do mine suck?
>
> -craig
>
|