Date: Fri, 22 Mar 2013 06:37:04 -0400
Reply-To: Frank Condelli <RAlanen@AOL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Frank Condelli <RAlanen@AOL.COM>
Subject: Re: Propex install near water tank
Content-Type: text/plain; charset=us-ascii
Couple of points need clarification here. Regarding the shore power and other wires. None of that has to be interrupted. If you have a Canadian model with the shore power cord stored in the cabinet then just cut it off, make an extension cord with it and install a receptacle like on the US models, you should have done this long ago anyways, who what to fight with the cord to get it out and back in ? The rest of the wiring inside that cabinet will not interfere wight the Propex. As for the exhaust and intake going through the side wall this cannot happen. They must exit through the floor as will the propane line so there will be three holes that will be cut in the floor. If these holes with their respective pipes are properly protected there is no concern for leaking. Also, remember that the Propex is a zero clearance heater so there is no need to worry about anything touching the heater anywhere. This is by far the best place to install the Propex HS2000 in a Vanagon Westfalia. We do now however have the new HS2211 from Propex that installs outside under the van so there is another option available. See my <www.frankcondelli.com/propex.htm> webpage for details. Canadian sales only !
On 2013-03-22, at 12:00 AM, Automatic digest processor <LISTSERV@GERRY.VANAGON.COM> wrote:
> Frank Condelli(might be misspelled) from Canada mounted his there and
> shared photo's of it. He is active on the list at times and has a business
> and website for Vanagons. If I get around to installing a propex that is
> where I plan on mounting it also. I do not want extra holes in our floor
> pan and value the space under the seat too much. Part of Franks
> installation uses an area that is normally wasted as it is behind a false
> wall between the cubby and the water tank compartment wall. The false wall
> is there to protect the shore power wiring and you will lose that
> capability to mount your propex there but for me it is not an issue. We
> have never used shore power and probably never will most of the places we
> camp it is not available even if we wanted it. Mounting there allows the
> air inlet and exhaust to go through the drivers side body panel eliminating
> more holes( water entry points) in the floor.
Cheers,
Frank Condelli
Almonte, Ontario, Canada
'87 VW Westy, '00 Kawasaki 250 Sherpa, "98 Ducati 750 Monster & Lionel Trains (Collection for sale)
Frank Condelli & Associates - Vanagon/Vanagon Westfalia Service in the Ottawa Valley
Vanagon Stainless Steel Exhaust Systems
BusFusion a VW Camper camping event, Almonte, ON, June 06 ~ 09, 2013
|