Date:         Wed, 3 Apr 2013 17:29:07 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Westy Shelf Tip & question
Comments: To: Troy <colorworks@gci.net>
In-Reply-To:  <496E4DF8D76A426D852415AFA754303B@troya3a1e48888>
Content-Type: text/plain; charset=ISO-8859-1

Hey Troy.

I stripped the parts to bare wood. A clean surface was needed. FWIW to
all, this type of scraper:
http://www.thepaintstore.com/v/vspfiles/photos/10610-2T.jpg worked
great to remove almost all the OEM glue. The belt sander didn't hurt
either.

Have stained a light colour, may stain it darker. Making use of what
was on hand. But....

Hadn't thought of slippage. Humph. Oh well.

Thanks for the suggestions.

Neil.

On Wed, Apr 3, 2013 at 4:21 PM, Troy <colorworks@gci.net> wrote:

> Hi Neil:
>
> Have you checked into really thin (1/32") plastics? A lot of glass shops
> sell these. Of course, there's always plastic laminate, glued down with
> contact cement, but you'll need a flush trimming router for that job. Super
> durable though.

>..... although I've used some rubberized mesh
> like material that doesn't require any glue and keeps things from sliding. I
> got the mesh at the supermarket--it was mixed in with the contact paper.




--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej