Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2013, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 9 Apr 2013 00:25:24 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Heater fan CHIRP!
Comments: To: Stuart MacMillan <stuartmacm@GMAIL.COM>
In-Reply-To:  <001401ce3481$cb7d11c0$62773540$@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I will share my low cost low tech things that have workedfor me.

1. if it doesn't chirp on a higher speed ....use it at that speed to get it going. That seems to get the self-lubricating properties of the bushings working again ...sometimes. The chirp sound, IMO is the sound of metal molecules sheering off , metal to metal. Don't run it in chirpmode.

2. consider the Karl M fix ..involves drilling a hole and squirting lube.

3. back to low tech/low cost/low effort solution ... ...remove front grill, then remove the smaller grill.. run fan , feed a fog of WD-40 into the fan air intake. This sort of thing works a lot for me. Is an example of what I call 'messaging to health.'

4. Submerge entire van in a giant vat of WD-40 for 2 minutes, lift out. Drive.

re your comment .. I have almost *never* had a problem treating *anything* with WD-40. mainly metal and electrical, and rubber , though sparingly on that one. metal and electrical .. mostly all it can take. I would submerge a starter in WD-40 example.. as much as the notion of that might freak people out. WD-40 as *never* done me wrong, in some 40 yrsof constant car work. I buy it by the gallon and use a spray bottle.

On 4/8/2013 10:52 AM, Stuart MacMillan wrote: > It's so loud and high pitched that it's painful to use the blower, even with > my reduced hearing. But, as I continue to, it's becoming less frequent. Do > these things ever fix themselves? It's probably dry bearing or worn > commutator/brushes, but with only 140k on it (an '85) it doesn't seem like > it should be worn out since my '84 worked fine for 20 years and 225k. > > > > I'm tempted to shoot some WD-40 into the intake, but I'd probably regret it. > > > > > Stuart >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.