The Westfalia add-on poptop kits cut only a small hole like I do, just the skin over the floor area. My holes are 43" by 43", with rounded corners with about a 4" radius. I put a plate or bowl down on the roof to mark the corners for cutting. That photo is the most recent top I did in Nov 2012, 1990 passenger van. Here it is finished, camped at Thanksgiving with the first van I put a top on 19 years ago, the grey Syncro. The blue van in the photo is a stock 82 Westy 1.9TD. http://images.thesamba.com/vw/gallery/pix/1050291.jpg The factory sunroof vans are not great for adding a top to. Better a plain hardtop van. Really. People who cut out the whole roof and weld in a Westy roof are doing so to get a flat roof and one that is a little lower than the hardtop roof so there is more room for cushions up there when the top is down. Then they use the factory bed up there. Too much work, too much welding, too much painting. I follow the Westfalia kit model. Small hole, no cutting of roof support arches. The side lips of my cut opening need some support. I use angle stock steel or aluminum under the lip, especially where the front support legs go. The cut lip gets filed smooth. Then I put cloth adhesive tape over the metal edge, folded so it goes above and below the lip. Then I pull the headliner up over the lip and put edge trim over the lip, capturing the headliner. Then trim the excess headliner on top. Sorry, I am leaving on a trip and won't have time for full details till next week. Mark neil n wrote: > I recall your Syncro Westy now. > > The roof hole in the image you link to seems very similar in size to > the factory sunroof. > > I've seen the threads where people cut and weld the roof and top from > a Westy to a passenger Vanagon. > > I didn't know that Westfalia sold the top etc. as a kit. So based upon that..... > > A quick look in 60 and 75 of Bentley, if one cut a large hole (OEM > Westy size) in a tin top, the only difference between that and an OEM > Westy hole, is the lip. Does that lip provide any strength to the body > if a big hole is cut? > > Neil. > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.