hi .. first thing you should know then Steve is that 2WDmanual trans 86 to 91's do not all have the exact same hoses. the one variation I can think of right now, and maybe the only one is ... the coolant distributor tower behind the firewall on the right side. there are two versions. it might be one for 86 and the rest is 87 and up. It's a little confusing. Van Cafe says to get the part # off your old one. They can just disintegrate sometimes, btw. - that large plastic part. it depends on where the hose coming off the right front of the cylinder head goes to, on the coolant distribution tower. two versions, for that hose, and for the coolant towerthere. Perhaps be more specific about what your actual problem/issue or hose issue is and we can help you better. Scott On 4/21/2013 1:55 PM, Steve Cotsford wrote: > I'm looking for a good diagram for the cooling system.....86-91 WBX 2wd manual. > > The Bentley manual shows part of it. I find the Bus Depot diagrams quite confusing. Is there a better diagram online somewhere? > > I have some hoses that have been cut and I need to track down their part numbers. > > Thanks for any help. > > Steve |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.