Date: Mon, 15 Apr 2013 19:00:48 -0400
Reply-To: Bryan Feddish <uprightbassghost@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Bryan Feddish <uprightbassghost@HOTMAIL.COM>
Subject: Re: Black wire by water tank...
In-Reply-To: <COL0-MC4-F423PcEzp60075534a@COL0-MC4-F42.Col0.hotmail.com>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=response
Thanks for the write-up. I'll print this out and trouble shoot later this
week or next weekend. In the meantime, most of the van is back together
since gutting the interior. It's been 7 weeks and allot more work than
anticipated. I'm still doing allot of detail stuff at the moment but I'm
really happy to have moved that Propex from under the back seat along with
other space saving mods like Ken at Vanagain's battery setup.
I should have a video soon.
Thanks!
Bryan
-----Original Message-----
From: David Beierl
Sent: Monday, April 15, 2013 4:21 PM
To: Bryan Feddish
Cc: vanagon@GERRY.VANAGON.COM
Subject: Re: Black wire by water tank...
At 03:33 PM 4/15/2013, Bryan Feddish wrote:
>hmmmm, I was hoping it would be to my water pump somehow. Everything is
>working except the faucet at the moment.
Water pump is red from kitchen fuse to LED panel connector pin 4,
jumpered to pin 1 (because the earliest LED panels had a transistor
switch for the water pump supply) then yellow to faucet switch
connector and thence yellow to a double connector in the "secret
compartment" forward of the water tank where it plugs into water pump
blue. Water pump brown returns to same connector where it connects
brown to ground in common with the tank sender.
Failure points are the rather simplistic faucet switch which is often
repairable (unscrew the cap and it's right there), not making full
contact on faucet connector/pump connector (either by not plugging in
far enough, or by having the terminals miss each other when plugging
in -- look carefully through clear cover), and the pump itself.
Voltage testing, back-probe the pump connector for +12 on the blue
wire and ground on the brown one (faucet switch on of course). If
both are +12 then bad ground. If no +12, check the yellow side. If
no +12 there, pop the top of the faucet and look for +12 on one pin,
check for broken wire and repair if needed.
If no +12 at faucet, or if present but jumpering across the switch
doesn't make the pump run, basically what's left is the faucet
connector behind the silverware drawer.
If the pump connector is screwed to the bulkhead, easier to work with
if you take it off the wall first IIRC.
Yrs,
d