Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2013, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 24 Apr 2013 08:04:48 -0400
Reply-To:     Bill Monk <billmonk@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bill Monk <billmonk@GMAIL.COM>
Subject:      Re: Front heater valves, another junk part
Comments: To: James Felder <jim.felder@GMAIL.COM>
In-Reply-To:  <B54B73DC-6FEA-4D7C-B741-31D7111095CC@gmail.com>
Content-Type: text/plain; charset=us-ascii

Anyone have a source/part number for that clip?

Bill

Sent from my iPhone

On Apr 24, 2013, at 7:26 AM, James Felder <jim.felder@GMAIL.COM> wrote:

> That cable clamp... One of the easiest things on a Vanagon IF you have it right in front of you instead of trying to do it blind up in the hole it's in. > > Since you have to take the hoses off anyway, go ahead and take it off at the top where it goes into the heater box, behind the glove box. Then remove the 7mm bolt that clamps the heater control. Pull off the heat distribution cover and then pull the valve down to the floor where you have a fair chance of dealing with it. > > More stuff to do, but easier especially to get the clip just right. > > Jim > > On Apr 24, 2013, at 12:07 AM, Stuart MacMillan <stuartmacm@GMAIL.COM> wrote: > >> I like NAPA, but not everything has a lifetime warranty. In fact, I'm not sure anything does anymore. Just bought a Bosch fuel pump for my Ranger, and it's 12 mos too. This valve has a 12 mo warranty, but I'm not replacing it every two weeks. That cable clip is a real PITA. >> >> Funny, I bought a heater valve for my Ranger from them last year, and it blew after two months! The second one has gone a year so far, and I carry a spare. I can change it in 15 min with a pair of pliers for the hose clamps. >> >> Stuart >> >> -----Original Message----- >> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of JRodgers >> Sent: Tuesday, April 23, 2013 9:29 PM >> To: vanagon@GERRY.VANAGON.COM >> Subject: Re: Front heater valves, another junk part >> >> I shopped rebuilt power steering pumps all over the place - VW dealerships, List Vendors, RockAuto, AutohausAZ, and others - way expensive!! Finally bought a rebuilt from NAPA - $170 - no exchange, lifetime warranty. If it breaks - take it back and get another. Hard to beat that kind of warranty. It pays to shop around for sure! >> >> John >> >> On 4/23/2013 4:40 PM, Dave Mcneely wrote: >>> ---- Stuart MacMillan <stuartmacm@GMAIL.COM> wrote: >>>> Just replaced my leaking OEM valve two weeks ago (200 miles) with one

>>>> from NAPA that cost $4. Box said made in China, no identifying marks

>>>> are on it, but it looks identical. It's now leaking worse than the >>>> old one. Just ordered OEM valve from VW, $60. You get what you pay for. >>> >>> I got a NAPA front heater valve two years ago. No problems so far. >>> mcneely >>> >>>> >>>> >>>> >>>> Stuart >>>> >>>> '85 Westy >>> >>> -- >>> David McNeely >>> . >>>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.