Great - thanks for the info John and Larry! Next up. Cutting the old bolts off. Should be fun!
On Wed, May 1, 2013 at 8:54 AM, John Meeks <vanagon@gmail.com> wrote: > Mark, > You should be able to slip the j-pipe into the system. Be sure the gaskets > are aligned when you tighten the new bolts. > > John Meeks > '91 Multivan > Stock 2.1 250k miles > > http://www.vanagonauts.com > Vanagon Rescue Squad > iPhone and Android apps > On Apr 30, 2013 8:10 PM, "Mark Brush" <mbrush@gmail.com> wrote: > >> My exhaust pipe - the collector pipe to the catalytic converter - has a >> hole in it. I've patched it several times, but it really needs to be >> replaced. >> >> Is it as simple as cutting off the old bolts and bolting the new pipe and >> gaskets in place? Or is the exhaust more of a connected puzzle than that? >> I.e. - you can't remove one part without first removing the others? >> There's >> a flange on the new elbow pipe, so it looks like the pipes slip together - >> might be really hard to slip apart without breaking other parts. >> >> Never worked on the exhaust yet - first time for everything! >> >> Thanks for any insights! >> >> Mark >> >> 1990 Westy 2.1 liter >> > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.