Removing the right side bracket or at least lowering it will make removal and reinstallation easy. As it is difficult to get to the cat to muffler bolts with it all in place I usually remove it with the Cat and swap the cat to the new muffler and then put it back together in one shot. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Edward Maglott Sent: Saturday, May 4, 2013 7:57 PM To: vanagon@GERRY.VANAGON.COM Subject: removing muffler on 2.1 Well, it's almost out. A little sawzall, a little dremel, a little angle grinder.... It's separated from the Cat, and the straps are off. Do I need to remove the bottom half of the muffler brackets? Edward |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.