On May 12, 2013, at 10:00 PM, Geneva Saint-Amour <genevasaintamour@HOTMAIL.COM> wrote: Hello fellas-I apologize if this has already been covered- but Bentley has failed me, as has a search. How do I remove the interior latch on the sliding glass window inside of a 1985 Westfalia? Thanks,Geneva and Mike85 Bostig (now with high top!) I made a small, right-angled screw driver. There is a small standard screw in the bottom of the latch. You can see and feel the hole in the latch. I bent a small standard screw driver so I ended up with a handle that sticks out of the bottom hole 90 degrees. Just made it easier to apply enough pressure to unscrew and tighten that screw. You'll feel it drop into the slot if you stick the blade up into the hole and move it around carefully. bob |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.