On Fri, May 10, 2013 at 10:39 AM, neil n <musomuso@gmail.com> wrote: > > I repaired the passenger side radius arm hole at the frame. IF that > repair has failed, and there is now too much movement between the arm > and hole, could this cause the pull? > > > Thanks > > Neil. > > > Seems like that could cause the pull to the right. Both brakes being equally effective, but the right hand wheel having a little more 'play'....front to rear movement made possible by the radius arm attachment being slightly looser....then when you brake, that right suspension is going to move to the rear of the van a little...Gotta cause some deviation in the vector of travel. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.