Regarding the tiny pin (drift?) that holds the handle to the pivot. I had a pin that continually worked out on the drivers side and replaced it with a new one which has worked great. But, in buying one pin, I had to order a packet and don't need them. If anyone needs one or two pins let me know and I can send what you need. Harold Harold Teer 1991 Westy -- VANGAUX Harrisonburg, VA
On Tue, May 7, 2013 at 10:30 PM, Ben <syncro@gmail.com> wrote: > Dean, > > There is a small pin which holds the handle to the pivot. Drive the pin > out and press the assembly as tight as you can. Then drive the pin back in. > > > > BenT > sent from my electronic leash > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.