Date:         Thu, 16 May 2013 10:15:05 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Heater Fan
Comments: To: Bryan Feddish <uprightbassghost@hotmail.com>
In-Reply-To:  <BLU162-DS114835572C252AA4E1E297CEA30@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1

Very helpful video! Much better than my attempt some years ago.

The "fat" Phillips screwdriver is one of the best investments I ever
made. Even at $10 used from a pawn shop, that Craftsmen tool is da
bomb.

I didn't watch every second of your video so you may have mentioned
it, but replacing those Phillips screws with metric cap bolts is best.
That and some anti-sieze.

One can use a long wobble extension or short wobble with extension for
the LH side heater box bolts. And at the risk of harping on this tool

http://www.homedepot.ca/product/1-2-de-impact-tool-set-6-piece/901334

it may have a large enough Phillips bit and could prove really useful
for the job. That used with an extension and wobble + penetrating
fluid may help.

Neil.


On Thu, May 16, 2013 at 4:48 AM, Bryan Feddish
<uprightbassghost@hotmail.com> wrote:


> I usually film my adventures, here is the front heater fan:
>
> http://www.youtube.com/watch?v=JTTtTODTF10

--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej