Date:         Thu, 16 May 2013 14:32:32 -0700
Reply-To:     Old Volks Home <oldvolkshome@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Old Volks Home <oldvolkshome@GMAIL.COM>
Subject:      Re: '85 1.9 Manual accelerator cable replacement
Comments: To: Jeff Lincoln <magikvw@gmail.com>
In-Reply-To:  <CA+Spi20ez0g1aPkBh-MYyoeAnGeQY5sqnhhYLhWFU=S3EQHqOw@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Jeff -

Sounds like a PO or mechanic installed a different or modified barrel
clamp.  This is what it should have ORIGINALLY had:

Barrel  211 721 578 B
Screw w/Hex Head  N0102056  5x10mm

Unfortunately, I do not have one at the ready to inspect.

I've never seen one with an allen head screw before, even on the other VW
models that used similar barrel clamps.

--
Jim Thompson
84 GL 1.9 "Gloria"
84 Westfalia 2.1 "Ole Putt"
72 411 Station Wagon "Pug"
75 914 1.8 "Nancy"
Full Timing From March 1999 To January 2012
oldvolkshome@gmail.com
http://www.oldvolkshome.com
Find me on Facebook:
http://www.facebook.com/people/Jim-Thompson/100000710343835
***********************************

On Thu, May 16, 2013 at 6:10 AM, Jeff Lincoln <magikvw@gmail.com> wrote:

> Scott -
>
> At the throttle end mine does have that barrel clap - but it is not secured
> with a regular screw. The set screw is a very small allen type screw. Mine
> seems to be the only Non-Metric fastener I have come across. 1.27 and 1.5
> MM was too small and a 2 mm was too big. Turns out it was a standard .05 (I
> think I will have to verify that though because I am not remembering
> exactly).
>
> The 8mm bolt is at the front end of the bus and that attaches the cable to
> the pedal mechanism.
> Thanks,
>
> Jeff
> '85 GL (Gertie)
> '78 Bus (Melissa) Patty's Bus
>